3 Inside dimensions of your compartment
Measure the space actually available inside your furniture unit, in several places if possible, taking hinges, rails and uprights into account. Do not deduct any margin yourself: these measurements are those of your furniture, not the final dimensions of the panel. Kadris™ removes 5 mm on each side, to ensure easy fitting even if your furniture is not perfectly square.
Dimensions taken from your front measurements: check them before ordering.
4 Plexiglass front (optional)
Add a plexiglass frontPrice based on your measurements 100% clear, with no screws or magnets: it simply fits into your compartment for a clean, discreet look. It protects your set from dust and UV light, and its small tab lets you remove it in one move. Made to measure in France, not covered by the right of withdrawal.
1 2 Front view 6 cm 1 3 Side view
1 Width : at the front of the compartment, within the first 6 centimetres (where the edges of the front fit in).2 Height : in the middle of the compartment, where a shelf can sag.3 Depth : at least 6 cm clear at the front (the edges of the front go 6 cm inside).! Important : check that no screw, hinge, shelf pin or rail sticks out on the sides within the first 6 centimetres of the compartment. Otherwise, the front will not be able to fit in.
Measure to the millimetre and note the smallest value. To make fitting easier, Kadris™ takes 1.5 mm off your measurements. As the front is shaped by hand, it will never be larger than your measurements, at most very slightly smaller.
Your front measurements ([O]) differ by more than 2 cm from your compartment ([C]). Check them at the front of the furniture. If this front is meant for another compartment, you can continue.
Given the requested size, your front requires a precise quote (delivery on a pallet).
