How our displays are made
You are about to place a set that cost you time and money on a display you have never seen in real life. Wanting to know how it is made is only natural. Here is everything, in a few minutes.
The panel
Every display starts with an aluminium panel cut to the format of the model. The artwork is printed in high definition directly onto the aluminium, with a gloss finish that gives the set more depth. No paper, no plastic, no glass to break.
The supports, the real subject
This is where everything happens. For each set, we design supports positioned at the contact points of the model. They are screwed to the display and already installed when the parcel arrives.
Your assembled set simply sits on them, as it is. No glue, no disassembly, no part to modify, no hole to drill in the model. And because these are supports and not a permanent fixing, you can remove your set whenever you want.
The strength check
The question that always comes up: can it fall off? The strength of every display is checked with the set in place before it leaves the workshop: how the supports hold, the fixing to the panel, the stability of the model. Nothing ships without going through that check.
The Spectacular finish (LED frame)
On the Spectacular finish, the light strip is built in and hidden inside the aluminium frame. It runs on a rechargeable battery: no visible cable, no socket needed nearby. Brightness and colour are adjusted from an app on your phone.
What you receive
The display arrives fully assembled, supports in place, ready to hang. In the parcel: the display in the finish you chose, the wall mounting hardware and the instructions. The LEGO® set is not included: we make the display itself.
Where and by whom
Everything is made to order in our workshop in Haute-Savoie, checked before packing, then shipped with free tracked delivery. 14 days to change your mind on catalogue displays, return shipping at your expense, 2-year warranty.
The questions you may still have
Can I remove my set later?
Yes, at any time, without tools.
Do I have to drill or glue anything on the set?
No. The set stays intact.
What if I want to change the set on the display?
The supports are designed for one specific model. For another set, you need the matching display or a made-to-measure creation.
How does the display attach to the wall?
Like a classic frame, with the mounting hardware and the instructions supplied.
What if the parcel arrives damaged?
Write to us within 48 hours with photos, we will find a solution quickly.
See all displays or request a made-to-measure creation.
Kadris™ is an independent brand and is not affiliated with, associated with, authorised by or sponsored by the LEGO® Group.